Vacuum Track System

Vacuum Track System

Promotech’s vacuum track system provides firm grip of track segments on materials such as stainless steel, aluminium, carbon steel, etc… Light-weight and modular design enables easy adjustment and fitting of the system to specific needs depending on welding or cutting applications and working positions (e.g. flat, horizontal or vertical). System is compatible with standard Rail Bull track segments.

Key features

Back up reservoir for added safety in case of a power failure

The reservoir offers additional time to safely secure a welding tractor and tracks

Only 100 mm ( 4″) min. distance from heat source to vacuum pads

Maximum plate temperature up to
+ 320 C (608 F)

Modular design

You can easily configure the whole Vacuum Track System depending on your needs and job in hands. A large selection of system elements including rigid and semi-flexible rails, vacuum pads, hoses, valves and fittings help you make your work even more efficient. By means of Vacuum Track System you can perform lots of welding and cutting tasks in horizontal and vertical positions on both ferrous and non-ferrous materials.

Up to 4 rails can be connected separately for rail leapfrogging during operation

Rigid track allows easy job preparation from
out of material

Semi-flexible track enables fixing on curved surfaces with a radius of at least 5 meters (16ft)

Brochures

Make sure you are familiar with Promotech Vacuum Fixing System brochure including technical data and detailed information about this system. We recommend using our Rail Bull | Welding & Cutting Tractor with the system.

Vacuum Track System

Size: 1.1 MB Type: PDF

Technical Specification

Promotech’s system consists of vacuum generating pump and vacuum units that fix the semi-flexible or rigid track to the surface. A single pump provides gauge pressure sufficient for up to 21 vacuum units which provide suction power of 1400 N (at gauge pressure of –0.7 bar / –10 psig). The permitted load is up to 30 kg (66 lbs) – welding/cutting tractor with accessories. An optional manifold can separately connect vacuum units of up to four rails, what allows rail leapfrogging during operation. Temperature of material on which vacuum pads are used cannot exceed +320°C (608°F). Heat source must be kept at least 100 mm (4”) away from vacuum pads. Safety eye bolts are provided to suspend vacuum rail tracks and protect them against accidental fall.

System configuration for parallel connection

System configuration for serial connection

Demo video

Vacuum Track System

System elements and accessories

Vacuum pump with safety reservoir
AGR-541-00-00-00-0
Modular vacuum unit
MST-0541-01-01-40-0
Shut-off valve set
ZWR-0541-01-01-30-0
Threaded plug
KRK-000011
Pump connection hose (10m)
PWD-0541-06-00-00-0
Silicon cable (2m)
WAZ-00003
Track segment connection cab
PWD-0541-01-03-00-0
Quick connector
SZB-000018
4-way vacuum manifold with connection cable
ROZ-0541-04-00-00-0
Connector with external thread
KRC-000013
Safety eye bolt
SRB-000365
Cable tie
OPS-000005

Track elements

Semi Flexible Track
PRW-0482-15-05-00-0
Rigid Track Up-grate Set
PRW-0523-13-01-00-0
Bracket for Semi Flexible Track
DYS-541-02-01-00-0